WORKSPACE / Crew change planning
Current weather unavailableSelected flight base · observation pending
OFFSHORE WEATHER · FLIGHT OUTLOOK · JOURNEY HOME

ChopperChecker

A one stop shop for all your crew change needs.

Data & methodology

Know what sits behind the number

This is a heuristic weather suitability score expressed as a percentage. It is not calibrated against flight outcomes, and 80% does not mean eight out of ten flights operate. No universal offshore flight limits or actual crew-change probability are asserted.

The wind/weather-v3 model combines three equally weighted heuristic groups: wind (sustained and peak/gust scores), approach weather (cloud base, visibility and fog scores) and sea state (swell). Related factors combine by geometric mean within their group, and groups combine by geometric mean. A weakest-factor safeguard limits the result to twice the lowest individual factor score, so favourable factors cannot conceal a severe hazard. Wind uses graduated interpolation anchors; other factors use smooth safety-margin tapers (widths: 0.8 m swell, 1 km visibility, 250 ft cloud and 15 percentage points fog), normalized to their most favourable supported input. A factor approaches 0.5 at an applicable threshold (unknown-rule visibility instead tapers towards zero visibility), so the weakest-factor cap reduces the overall score to approximately 1% before a breach forces 0%. The score screens destination conditions at the selected time; full-route cloud/visibility and weather changes throughout the journey are not assessed. These are mathematical forecasting heuristics, not statistical uncertainty estimates or certified operational limits. Whole percentages span 0–100 with no 5-point rounding. Any applicable selected threshold breach, explicit zero cloud base/visibility, or applicable verified restriction gives 0% with a reason, not a confirmed cancellation. Cloud, swell and fog settings remain planning thresholds requiring operator confirmation. Visibility is a caution marker unless a specific flight-rule scenario or user-supplied applicable minimum is selected; IFR procedure minima are not inferred. None is a universal UK crew-change minimum. The score is uncalibrated: 100% is not a guarantee and 0% is not an operational decision.

Forecast coverage

Open-Meteo Weather API ↗ provides hourly 10 m wind, gusts and visibility. Open-Meteo Marine API ↗ provides swell height. Model grid values are not helideck measurements. The automatic outlook compares DMI HARMONIE, NOAA GFS and DWD ICON via Open-Meteo where their coverage overlaps. The median available wind, gust and visibility values are used. DMI supplies modelled cloud base where available. Uncorroborated zero model heights are excluded; a zero is retained only with surface-fog support. Missing data never becomes zero; elsewhere the app uses an explicitly labelled lifting-condensation-level proxy of 125 × (temperature − dew point) metres. That proxy is not a low-stratus ceiling forecast. The fog percentage is the fraction of available models predicting WMO code 45/48 or visibility below 1 km. It is model agreement, not calibrated fog probability. Forecast comparisons cannot guarantee improved accuracy. Values can be overridden in Custom assessment. All six inputs must be available for a complete score. Horizons vary, up to 15 days for the request; marine and regional forecasts may end sooner. The free endpoint is intended for non-commercial use; review its licence before operational deployment.

StormGeo Wave Risk Assessment ↗ includes asset-specific motion forecasting. This app has no StormGeo API connection or subscription access. Enter your licensed briefing manually.

Model sources: DMI forecast documentation, GFS forecast documentation, DWD forecast documentation. Windy is provided as an external visual cross-check; ChopperChecker does not read Windy data or imply independent verification. Same-day selections are supported, including earlier hours today as labelled model snapshots. Check conditions now uses Open-Meteo current conditions based on 15-minute model data, with an explicitly labelled hourly fallback when unavailable. Current mode refreshes every five minutes while the outlook is visible. It does not provide live helideck sensor observations. Other requests select the nearest forecast hour and display it; retrieval time is not model issuance time.

Flight board

The departures and arrivals tab reads public boards for CHC, Bristow and NHV. Ultimate Aviation / OHS remains an external flight-times link for Aberdeen and Sumburgh. Automated retrieval is disabled because reproduction permission has not been established; published times must not be confused with live tracking. Dates with no published data are not cancellations. Operator selection determines the published base list. CHC supports date queries in UTC. Bristow supports base/date queries but supplies clock times without a timezone; these are shown unchanged, with routing codes and ETA explicitly labelled. NHV supplies a rolling schedule with ISO timestamps, filtered to the selected UTC day; it may not contain historical or future records. Flight numbers absent from the source are displayed as not supplied. The original board is linked for each operator. Missing records never establish cancellation.

Visibility: model values and briefing reporting limits

Visibility comes from the atmospheric forecast, not the marine wave API. Values are modelled near the surface at sea-preferred grid cells for your entered offshore coordinates; they are not helideck observations, slant visibility or runway visual range. The median of valid, time-aligned model values drives the score. Metres are converted to km by dividing by 1000; 1 NM = 1.852 km. Negative, non-numeric and unsupported-unit values are excluded; genuine zero is retained. Full precision is retained through scoring. The cards show >10 km / >5.4 NM at or above 10 km, to make capped briefing displays comparable; lower values display normally. Raw model values and returned grid coordinates remain in Forecast cross-check. Open-Meteo does not document an API-wide visibility maximum here, so a repeated high model value is not asserted to be an observation or a confirmed hard limit. Model disagreements of at least 5 km are flagged, not silently resolved by forcing agreement with another provider.

Compare the same destination, valid time and briefing notation. Met Office guidance explains that aviation code 9999 represents 10 km or more. That does not establish every StormGeo product’s display convention. StormGeo is not connected; use your licensed, site-specific briefing in Custom Assessment when appropriate. Public model aggregation has not been validated to match professional marine sea-fog forecasting. Met Office marine guidance ↗ offers regional context, not a substitute numeric forecast for your helideck.

Cloud reports & route winds

Airport METAR observations and TAF forecasts come from NOAA Aviation Weather Center, with source times shown. They describe the selected flight base, not offshore conditions, and do not replace the offshore forecast in the score. No automatic public helideck observation feed is available here. GFS 925 hPa wind at an approximate route midpoint is used for a straight-line journey estimate, with 10 m wind clearly labelled if altitude data is unavailable. Meteorological wind direction is the direction the wind comes from. Route winds and journey duration do not affect suitability. Visibility is stored internally in km; 1 NM = 1.852 km exactly.

Offshore installation locations

Infrastructure names and WGS84 surface points are from the NSTA UKCS surface-point dataset, with the removed-infrastructure overlay checked. Only active platform, FPSO and FSO types enter the catalogue; this does not verify helicopter access or approved helideck coordinates. Source snapshot: 1 July 2026. Floating/mobile source positions are selectable as last known positions, with a warning that the vessel may have moved. Field centres from the NSTA UKCS hydrocarbon fields and field determinations datasets are calculated inside their published boundaries; historical and non-producing fields remain available with their status. Regional search groups are approximate. Contains information provided by the North Sea Transition Authority and/or other third parties. Reused under the NSTA non-commercial User Agreement. No NSTA endorsement is implied.

Wind reference and missing helideck information

UK SPA.HOFO.135 limits reported wind at the helideck to no more than 60 kt including gusts; equality is not an exceedance. This is a ceiling, not permission to operate below it. No CHC, Bristow, aircraft or installation-specific wind limits have been inferred. Published, dated, scoped restrictions can be loaded only after review. Route crosswind uses flight-level wind for travel time; it is not a helideck crosswind limit. Helideck heading/airflow sectors, turbulence, deck motion, MSI and WSI require authoritative deck/aircraft-specific data, which is not currently connected. Swell does not substitute for HMS measurements.

Operational references

CAA CAP 437 ↗ addresses offshore landing-area standards; it is not a universal dispatch-limit profile. Helimet ↗ provides offshore weather reports subject to access. Check the operator's procedures and official aviation briefings for the entire flight.

Triggered lightning

The compact North Sea card shows cross-model agreement on a research-inspired point screen, not strike probability. It checks flight-height temperature, hourly precipitation and freezing-level height in GFS, ICON and UK Met Office global data. It omits the published algorithm’s spatial smoothing and has not been validated. Missing inputs exclude a model; fewer than two complete models means no percentage. Zero agreement cannot rule out risk. It is entirely separate from suitability.

What this estimate excludes

Departure and alternate minima, route weather beyond the approximate wind sample, turbulence, icing, lightning, night operations, pitch/roll/heave, aircraft performance, equipment status and logistics. Swell cannot substitute for a helideck motion system. Final dispatch and landing decisions belong to the operator and commander.

ⓘ
Indicative weather score, not flight clearance. Your operator decides. See Data & methodology for how the percentage works.

Take ChopperChecker with you

Add ChopperChecker to your home screen for quick access to your offshore flight outlook.

Optional app-use counts follow your analytics preference.

Choose offshore destination

Select a destination to set your default. Its departure base and journey direction will be remembered. Use the star beside the selector to add or remove favourites.

Regional fallback or your coordinates

Search all record types together. Fields use an approximate central point inside the official boundary; their status is shown. Floating/mobile coordinates are last known positions: the vessel may have moved and the location may be incorrect. No live rig tracking is connected.

Catalogue source and currency

NSTA non-commercial User Agreement ↗ · Missing installation or location correction ↗