You’re offline. Previously shown information may be out of date; reconnect for current forecasts and flight status.
ChopperChecker
A one stop shop for all your crew change needs.
Calculate your helicopter flight probabilityPlan your crew change
Flight plan & location
Location details & coordinates
Displayed to 3 decimal places. Forecasts and routing retain the original coordinate precision.
Your flight, at a glance
● DEMO SCENARIOWind
Waiting for forecast
Waiting for forecast
Cloud base
Waiting for forecast
Triggered lightning
Models meeting risk conditions
Data pending
Not strike probability; 0% cannot rule out risk.
Visibility
Waiting for forecast
Wind direction
Route wind pending
Sea state
Waiting for forecast
Height only · not helideck motion
7-Day Flight Outlook
Hours
Personal planning window, not official operator hours.
Forecast details
Conditions at your destination
Details & sources ⌄
Original forecast / reviewed weather · unchanged by what-if controls
Wind & journey time ⌄
Wind & journey time
Forecast route winds; what-if gust, cloud and visibility changes do not alter this route model.
Checking the wind’s effect on your journey…
Approximate wind effect; actual flight times may vary.
See more
Fallback data: MET Norway · CC BY 4.0. Surface winds are converted to knots and averaged; no provider endorsement.
Aircraft performance reference ↗Compared with the same direct journey in still air, not with your published timetable. The selected aircraft supplies a representative cruise speed; see its performance reference above. These are planning assumptions, not an operator-approved speed profile. Aircraft weight, altitude and procedures vary.
Uses the selected base and offshore coordinates as a direct route, with one forecast wind sample near its midpoint. Published multi-stop itineraries and rig coordinates are not inferred. Resolves headwind/tailwind and crosswind, then estimates wind-corrected groundspeed. Flying time = distance ÷ groundspeed; the difference is measured against distance ÷ assumed cruise speed. Excludes climb, descent, stops, holding, routing, payload and operator restrictions. Does not change weather suitability.
Latest flight-base cloud reports
Loading the latest available METAR and TAF…
Airport observations and terminal forecasts describe the selected onshore base, not the offshore helideck. They are contextual checks and never replace offshore cloud base in the score.
Method & data
Checking temperature, rain and freezing level…
This unvalidated point screen counts available models meeting all three research-inspired criteria: mean temperature at 610–914 m of −6 to −1 °C; hourly precipitation of at least 4 mm (a mean-rate proxy); and freezing level at 305–1372 m. The percentage is models meeting all three divided by models with complete data. At least two complete models are required. It is not the chance of a strike.
Flight-height temperature is integrated from pressure-level profiles. Freezing level is interpolated if not supplied. This differs from the published Met Office algorithm: different models and resolutions, hourly rain averages, and no 56 km neighbourhood smoothing. It is not validated or suitable for dispatch decisions, does not assess your route, and may miss local showers. The coarse North Sea bounding box is not a sea/land or UK-sector mask; use offshore coordinates.
Method: Wilkinson et al., North Sea triggered-lightning research. Data: Open-Meteo / GFS, ICON, UK Met Office global. Operator briefing: Met Office MAVIS.
How what-if mode works
Only the adjusted mean wind, gust, cloud-base, visibility and swell values change. The same existing suitability rules are applied; the forecast remains intact. Mean wind cannot exceed gusts, and gusts cannot be lower than mean wind. Fog agreement, lightning and flight-level route winds stay at their forecast values. Changing visibility does not rerun fog or weather-code models. This is a sensitivity check, not a physically coupled weather forecast. Changes are temporary; exports label them separately.
Keep the full picture in view
Check departure, route, destination and alternate weather with your operator. Deck motion, icing, lightning, aircraft availability and operational restrictions are outside this estimate.
Public forecasts. Your expert inputs.
ChopperChecker helps North Sea offshore workers explore offshore helicopter weather, visibility and possible disruption before a crew change. Compare public forecasts with your site-specific briefing; the operator makes the flight decision.
Weather assessment & restrictions
Forecast cross-check
Get a forecast to compare DMI, GFS and ICON at the selected hour. No Windy API subscription is needed; data is supplied through Open-Meteo.
Was ChopperChecker’s prediction accurate? ⌄
Tell us the outcome of your crew-change flight. Your original forecast is recorded separately from what-if changes. Reports start unverified and do not automatically change the prediction model.
Waiting for an original forecast snapshot.
No login required. Privacy & retention · Contact & Feedback
Onward Travel
AFTER YOU LANDPlan the next leg home. Check flexible fares and leave time for flight changes, baggage and airport transfers.
Your Journey Home
TIMES IN UTCUses the flight-search arrival base when supported. You can choose another base.
Destination & connection allowances
Allowances are planning assumptions, not carrier rules. Check baggage, check-in, security and boarding deadlines. Taxi availability and road conditions may add time.
No verified onward departures are connected. Check the linked provider for a departure after your connection-ready time.
Providers may display local time. Compare dates and time zones before booking.
Road data © OpenStreetMap contributors / OSRM for static routes; published transfer guidance is linked on typical-range cards. No live traffic service is connected. Airport-area pickup points are indicative: confirm your operator’s terminal. This is a planning aid, not a guarantee of landing time or a connection.
Rail Travel
Air Travel
External booking providers open in a new tab. ChopperChecker does not sell tickets or guarantee connections.
Live webcams
FLIGHT BASE · VISUAL CHECKTake a look around your flight base before you travel. Open the provider’s player to check its latest footage and image timestamp.
Aberdeen / Dyce
Browse the nearby webcams listed by meteoblue. These are views around the airport area; a runway or helicopter apron view may not be available.
Open Aberdeen webcams ↗Provider: meteoblue / Windy webcam network. Some cameras show periodically updated images or timelapses rather than continuous video.
Sumburgh Airport
View the airport camera from the Control Tower Building, overlooking runway 15–33, on Shetland Webcams.
Watch Sumburgh webcam ↗Provider: Shetland Webcams. Playback, availability and any access requirements are managed by the provider.
Departures & arrivals
OPERATOR FLIGHT BOARDSChoose your helicopter operator, then a base and date. Find flights using the published vessel name or routing code. Departure and return times refer to the selected base, not landing at your vessel; each source’s timezone and coverage are shown below.
Source: public CHC flight board · UTC
Choose a date and base to load published flights.
Operator timetable
Full day timetable
Every flight returned by the selected operator’s public board for this base, date and timetable direction, regardless of your vessel filter. Delays and cancellations can have many causes; this board does not establish sea state or predict your flight’s outcome.
Public records from the selected operator’s board only. Missing flights are not evidence of cancellation. Schedule changes, access restrictions and unpublished flights may not be covered. Check your operator’s joining instructions and do not vary your check-in time based on this display. Refreshes while this tab is open every 2 minutes; source responses may be cached for 60 seconds.
Tell me what I want to hear
100% FICTION · 0% METEOROLOGYThe forecast has had its say. Now let wildly unqualified optimism have a go.
Just for laughs. These stories are made up regardless of the weather. They do not describe a real aircraft, flight, fuel, schedule or cancellation, and never change your weather assessment.
Custom weather assessment
YOUR INPUTSEnter conditions expected at the flight time. Automatic forecast values appear here for optional editing. Values stay in this browser. Decimal entries round automatically: wind, gusts, cloud base and fog to whole numbers; swell and visibility in km to one decimal place; visibility in NM to two decimal places. Copy figures from your authorised briefing; StormGeo is not connected.
Operating limits
The UK SPA.HOFO.135 reference ceiling is 60 kt reported helideck wind, including gusts. Modelled 10 m forecasts do not establish helideck compliance. Lower user-entered or verified aircraft, operator and helideck restrictions still apply. These settings are planning inputs, not operational clearance.
Data & methodology
Know what sits behind the number
This is a heuristic weather suitability score expressed as a percentage. It is not calibrated against flight outcomes, and 80% does not mean eight out of ten flights operate. No universal offshore flight limits or actual crew-change probability are asserted.
The wind/weather-v3 model combines three equally weighted heuristic groups: wind (sustained and peak/gust scores), approach weather (cloud base, visibility and fog scores) and sea state (swell). Related factors combine by geometric mean within their group, and groups combine by geometric mean. A weakest-factor safeguard limits the result to twice the lowest individual factor score, so favourable factors cannot conceal a severe hazard. Wind uses graduated interpolation anchors; other factors use smooth safety-margin tapers (widths: 0.8 m swell, 1 km visibility, 250 ft cloud and 15 percentage points fog), normalized to their most favourable supported input. A factor approaches 0.5 at an applicable threshold (unknown-rule visibility instead tapers towards zero visibility), so the weakest-factor cap reduces the overall score to approximately 1% before a breach forces 0%. The score screens destination conditions at the selected time; full-route cloud/visibility and weather changes throughout the journey are not assessed. These are mathematical forecasting heuristics, not statistical uncertainty estimates or certified operational limits. Whole percentages span 0–100 with no 5-point rounding. Any applicable selected threshold breach, explicit zero cloud base/visibility, or applicable verified restriction gives 0% with a reason, not a confirmed cancellation. Cloud, swell and fog settings remain planning thresholds requiring operator confirmation. Visibility is a caution marker unless a specific flight-rule scenario or user-supplied applicable minimum is selected; IFR procedure minima are not inferred. None is a universal UK crew-change minimum. The score is uncalibrated: 100% is not a guarantee and 0% is not an operational decision.
Forecast coverage
Open-Meteo Weather API ↗ provides hourly 10 m wind, gusts and visibility. Open-Meteo Marine API ↗ provides swell height. Model grid values are not helideck measurements. The automatic outlook compares DMI HARMONIE, NOAA GFS and DWD ICON via Open-Meteo where their coverage overlaps. The median available wind, gust and visibility values are used. DMI supplies modelled cloud base where available. Uncorroborated zero model heights are excluded; a zero is retained only with surface-fog support. Missing data never becomes zero; elsewhere the app uses an explicitly labelled lifting-condensation-level proxy of 125 × (temperature − dew point) metres. That proxy is not a low-stratus ceiling forecast. The fog percentage is the fraction of available models predicting WMO code 45/48 or visibility below 1 km. It is model agreement, not calibrated fog probability. Forecast comparisons cannot guarantee improved accuracy. Values can be overridden in Custom assessment. All six inputs must be available for a complete score. Horizons vary, up to 15 days for the request; marine and regional forecasts may end sooner. The free endpoint is intended for non-commercial use; review its licence before operational deployment.
StormGeo Wave Risk Assessment ↗ includes asset-specific motion forecasting. This app has no StormGeo API connection or subscription access. Enter your licensed briefing manually.
Model sources: DMI forecast documentation, GFS forecast documentation, DWD forecast documentation. Windy is provided as an external visual cross-check; ChopperChecker does not read Windy data or imply independent verification. Same-day selections are supported, including earlier hours today as labelled model snapshots. Check conditions now uses Open-Meteo current conditions based on 15-minute model data, with an explicitly labelled hourly fallback when unavailable. Current mode refreshes every five minutes while the outlook is visible. It does not provide live helideck sensor observations. Other requests select the nearest forecast hour and display it; retrieval time is not model issuance time.
Flight board
The departures and arrivals tab reads public boards for CHC, Bristow and NHV. Ultimate Aviation / OHS remains an external flight-times link for Aberdeen and Sumburgh. Automated retrieval is disabled because reproduction permission has not been established; published times must not be confused with live tracking. Dates with no published data are not cancellations. Operator selection determines the published base list. CHC supports date queries in UTC. Bristow supports base/date queries but supplies clock times without a timezone; these are shown unchanged, with routing codes and ETA explicitly labelled. NHV supplies a rolling schedule with ISO timestamps, filtered to the selected UTC day; it may not contain historical or future records. Flight numbers absent from the source are displayed as not supplied. The original board is linked for each operator. Missing records never establish cancellation.
Visibility: model values and briefing reporting limits
Visibility comes from the atmospheric forecast, not the marine wave API. Values are modelled near the surface at sea-preferred grid cells for your entered offshore coordinates; they are not helideck observations, slant visibility or runway visual range. The median of valid, time-aligned model values drives the score. Metres are converted to km by dividing by 1000; 1 NM = 1.852 km. Negative, non-numeric and unsupported-unit values are excluded; genuine zero is retained. Full precision is retained through scoring. The cards show >10 km / >5.4 NM at or above 10 km, to make capped briefing displays comparable; lower values display normally. Raw model values and returned grid coordinates remain in Forecast cross-check. Open-Meteo does not document an API-wide visibility maximum here, so a repeated high model value is not asserted to be an observation or a confirmed hard limit. Model disagreements of at least 5 km are flagged, not silently resolved by forcing agreement with another provider.
Compare the same destination, valid time and briefing notation. Met Office guidance explains that aviation code 9999 represents 10 km or more. That does not establish every StormGeo product’s display convention. StormGeo is not connected; use your licensed, site-specific briefing in Custom Assessment when appropriate. Public model aggregation has not been validated to match professional marine sea-fog forecasting. Met Office marine guidance ↗ offers regional context, not a substitute numeric forecast for your helideck.
Cloud reports & route winds
Airport METAR observations and TAF forecasts come from NOAA Aviation Weather Center, with source times shown. They describe the selected flight base, not offshore conditions, and do not replace the offshore forecast in the score. No automatic public helideck observation feed is available here. GFS 925 hPa wind at an approximate route midpoint is used for a straight-line journey estimate, with 10 m wind clearly labelled if altitude data is unavailable. Meteorological wind direction is the direction the wind comes from. Route winds and journey duration do not affect suitability. Visibility is stored internally in km; 1 NM = 1.852 km exactly.
Offshore installation locations
Infrastructure names and WGS84 surface points are from the NSTA UKCS surface-point dataset, with the removed-infrastructure overlay checked. Only active platform, FPSO and FSO types enter the catalogue; this does not verify helicopter access or approved helideck coordinates. Source snapshot: 1 July 2026. Floating/mobile source positions are selectable as last known positions, with a warning that the vessel may have moved. Field centres from the NSTA UKCS hydrocarbon fields and field determinations datasets are calculated inside their published boundaries; historical and non-producing fields remain available with their status. Regional search groups are approximate. Contains information provided by the North Sea Transition Authority and/or other third parties. Reused under the NSTA non-commercial User Agreement. No NSTA endorsement is implied.
Wind reference and missing helideck information
UK SPA.HOFO.135 limits reported wind at the helideck to no more than 60 kt including gusts; equality is not an exceedance. This is a ceiling, not permission to operate below it. No CHC, Bristow, aircraft or installation-specific wind limits have been inferred. Published, dated, scoped restrictions can be loaded only after review. Route crosswind uses flight-level wind for travel time; it is not a helideck crosswind limit. Helideck heading/airflow sectors, turbulence, deck motion, MSI and WSI require authoritative deck/aircraft-specific data, which is not currently connected. Swell does not substitute for HMS measurements.
Operational references
CAA CAP 437 ↗ addresses offshore landing-area standards; it is not a universal dispatch-limit profile. Helimet ↗ provides offshore weather reports subject to access. Check the operator's procedures and official aviation briefings for the entire flight.
Triggered lightning
The compact North Sea card shows cross-model agreement on a research-inspired point screen, not strike probability. It checks flight-height temperature, hourly precipitation and freezing-level height in GFS, ICON and UK Met Office global data. It omits the published algorithm’s spatial smoothing and has not been validated. Missing inputs exclude a model; fewer than two complete models means no percentage. Zero agreement cannot rule out risk. It is entirely separate from suitability.
What this estimate excludes
Departure and alternate minima, route weather beyond the approximate wind sample, turbulence, icing, lightning, night operations, pitch/roll/heave, aircraft performance, equipment status and logistics. Swell cannot substitute for a helideck motion system. Final dispatch and landing decisions belong to the operator and commander.
Take ChopperChecker with you
Add ChopperChecker to your home screen for quick access to your offshore flight outlook.
Optional app-use counts follow your analytics preference.
Optional destination analytics
Destination statistics are on by default to improve ChopperChecker’s destination coverage and usability. Only explicit checks and installation/app-opening actions count. Counts use destination IDs/names, regions and explicit search timestamps. Favourite and sharing actions are counted separately (400-day aggregates; two-day retry receipts), without recipient identities. Visitor figures are pseudonymous network/browser estimates, not exact people. Detailed search and visitor-estimate records last 90 days; hourly/daily destination aggregates last two years. We do not log typing, booking details or precise search coordinates. Please do not enter personal or booking details.
Switch off free of charge here or with the button below. Your choice is remembered on this browser; earlier opt-outs and browser privacy preferences take priority. Counts are solely for improving this service, not advertising or profiling people. Retention and privacy details.
Optional destination and app-use counts help improve ChopperChecker. Details